Bases for Crowd Control Barricades: How to Choose Them

Steel barricades are weakest at their foundations. The bases of a steel barrier are particularly vulnerable to the deterioration brought on by repeated use and relocation.

Rather than risk having a barrier "out of commission" because its base was damaged, it is preferable to invest in barriers with interchangeable bolt-on bases. Bolt-on, changeable bases on barriers provide significant cost savings. Since replacing a barrier's foundation is a much more manageable and cost-effective option than replacing the complete barrier, a damaged base won't go unused for long.

These Iron Gates

Depending on your needs for Crowd Control Barricades, you should select a suitable barrier. About twenty years ago, steel fences were all the rage. They were ubiquitous at fairs, festivals, parades, conventions, and concerts. These steel barriers continue to be incredibly useful because of the wide range of models and design available in several quality levels.

Cost-Effective Concrete Walls

Concrete walls are another common form of security perimeter. When it comes to protecting roads, buildings, and other infrastructure, nothing beats a concrete barrier. The safety of the public with Access Control Gates is the main concern of businesses and governments, and these barriers are appropriate for that purpose.

They serve dual purposes as both separators and aids to traffic movement, making them ideal for open parking lots. These walls are often made of steel-reinforced concrete. Because of their resistance to Access Control Gates to the effects of the environment, they also have a high durability rating. 

Inundated Walls

Water-filled barriers Access Control Gates, another common option, are made from UV-resistant plastic polyethylene that has been recycled and is ideal for sporting events. These barriers are so lightweight and compact that they can be easily Crowd Control Barricades transported and set up with no effort.

Steel barricades can have four different kinds of replaceable bases. There are situations in which one is superior to the other.

Commonly Used Bridge Foundation

Since steel barriers were invented, the bridge base has dominated the market. When resisting the "push" of crowds at occasions like parades, bridge bases are your best bet.

The width of the bridge's footings ranges from just over 26 inches at the widest point to just under 19 inches at the narrowest. This allows the entire base to "dig in" and maintain contact with the ground at all times, ensuring optimal stability even over rough terrain. The placement of barriers on bridge bases might follow either a straight line or an oblique path.

The root that's level

The male and female Crowd Control Barricades end the barrier both have flat bases that measure 23.5 inches in width, but the bolt hole is located higher on the male end. Since their introduction in 1998, rubber inserts for flat bases have been common on flat products from most manufacturers. Flat bases can be utilized indoors, provided they have rubber feet to prevent damage to the floor. When it comes to rubber inserts, wider at the base is better.

"U" Base

U-Bases are relatively new but are aesthetically comparable to classic bridge bases. The U base, which was first used by the French Ministry of the Interior, is a very stable four-point foundation. Male U-bases have a width of around 22 inches, while female ones are narrower at about 17 inches. Rubber stoppers prevent the U base from slipping, making it suitable for indoor use without fear of harm.

Axle Pinion

Both the male and female ends of a barrier can benefit from wheelbases, making the barrier more mobile. Two wheels make up each wheelbase, and their combined width is about 25 inches. Any kind of base can be used at the female end of a barrier as long as a wheelbase is attached to the male end. The wheelbase is perfect for places where heavy objects are lifted or relocated often (like parking lot barriers). When a barrier with wheel bases will be used often, the size and strength of the wheels and bearings should be taken into account, as there are different quality levels of wheelbases.

Inserts

To avoid the need for an Access Control Gates base at the female end of a barrier, rubber-tipped inserts can be used instead. With inserts, barriers can be set at angles while maintaining touch with the ground (especially useful when using flat bases). Female ends of 1-meter barriers typically come with inserts, but the lengthier 2.5-meter barriers should not.

The Right Size?

All existing barrier types can be accommodated by modifying the previously stated foundation styles. Some outmoded frame modifications, however, may not work with conventional leg forms. Most established businesses in the field of crowd control barriers also stock replacement bases should the need arise.

Conclusion

Compared to welded-on bases, the cost of steel barricades is drastically reduced when they are specified. Barricades with broken bases can be repaired quickly and cheaply with the use of interchangeable replacement bases. There are four common types of bases, and each has advantages that have traditionally varied with the intended use of the barrier or the preference of the organization erecting the barrier.